DITL_1000.txt
Items: (8 entries)
  0:
    Bounds: x1=292, y1=195, x2=372, y2=217
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=49, y1=45, x2=378, y2=61
    Type: -120
    Info: 'Written by: Edward Devinney, Altan Nahum,'
  2:
    Bounds: x1=49, y1=61, x2=378, y2=77
    Type: -120
    Info: 'Murat Tanyel and Kin Wong.'
  3:
    Bounds: x1=49, y1=77, x2=378, y2=93
    Type: -120
    Info: 'Supervised by: Dr. B. Onaral.'
  4:
    Bounds: x1=49, y1=93, x2=378, y2=109
    Type: -120
    Info: 'Department of Electrical & Computer Engineering'
  5:
    Bounds: x1=49, y1=109, x2=378, y2=125
    Type: -120
    Info: 'Drexel University  Philadelphia, PA, 19104'
  6:
    Bounds: x1=49, y1=125, x2=378, y2=141
    Type: -120
    Info: 'To the user: Please direct all correspondence'
  7:
    Bounds: x1=49, y1=139, x2=378, y2=155
    Type: -120
    Info: 'to Dr. B. Onaral at the above address.'

DITL_205.txt
Items: (4 entries)
  0:
    Bounds: x1=100, y1=100, x2=180, y2=120
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=239, y2=33
    Type: -120
    Info: '          N O T E :'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'The diagram in the Square Wave'
  3:
    Bounds: x1=25, y1=70, x2=300, y2=85
    Type: -120
    Info: 'dialog box will not appear.'

DITL_204.txt
Items: (4 entries)
  0:
    Bounds: x1=100, y1=100, x2=180, y2=120
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=239, y2=33
    Type: -120
    Info: '          N O T E :'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'The diagram in the Sawtooth'
  3:
    Bounds: x1=25, y1=70, x2=300, y2=85
    Type: -120
    Info: 'dialog box will not appear.'

DITL_203.txt
Items: (4 entries)
  0:
    Bounds: x1=100, y1=100, x2=180, y2=120
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=239, y2=33
    Type: -120
    Info: '          N O T E :'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'Scrap files will be saved to the'
  3:
    Bounds: x1=25, y1=70, x2=300, y2=85
    Type: -120
    Info: 'folder holding the TWM Module.'

DITL_202.txt
Items: (4 entries)
  0:
    Bounds: x1=100, y1=100, x2=180, y2=120
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=239, y2=33
    Type: -120
    Info: '         CAN'T FIND FILE'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'The resource file 'POS' cannot be'
  3:
    Bounds: x1=25, y1=70, x2=300, y2=85
    Type: -120
    Info: 'found.  Please Continue & find it.'

DITL_201.txt
Items: (4 entries)
  0:
    Bounds: x1=100, y1=100, x2=180, y2=120
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=239, y2=33
    Type: -120
    Info: '         CAN'T FIND FILE'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'The resource file 'SAW' cannot be'
  3:
    Bounds: x1=25, y1=70, x2=300, y2=85
    Type: -120
    Info: 'found.  Please Continue & find it.'

DITL_200.txt
Items: (4 entries)
  0:
    Bounds: x1=100, y1=100, x2=180, y2=120
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=239, y2=33
    Type: -120
    Info: '         CAN'T FIND FILE'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'The file 'scrap#0' cannot be'
  3:
    Bounds: x1=25, y1=70, x2=300, y2=85
    Type: -120
    Info: 'found.  Please Continue & find it.'

DITL_98.txt
Items: (14 entries)
  0:
    Bounds: x1=160, y1=210, x2=240, y2=230
    Type: 4
    Info: ' Continue'
  1:
    Bounds: x1=110, y1=10, x2=285, y2=25
    Type: -120
    Info: '_______________________'
  2:
    Bounds: x1=110, y1=5, x2=285, y2=20
    Type: -120
    Info: 'FOURIER ANALYSIS Module'
  3:
    Bounds: x1=86, y1=30, x2=355, y2=45
    Type: -120
    Info: 'Written by: Murat Tanyel, Altan Nahum,'
  4:
    Bounds: x1=165, y1=45, x2=375, y2=60
    Type: -120
    Info: 'Edward Devinney and Kin Wong'
  5:
    Bounds: x1=86, y1=60, x2=271, y2=75
    Type: -120
    Info: 'Supervised by: Dr. B. Onaral'
  6:
    Bounds: x1=45, y1=80, x2=355, y2=95
    Type: -120
    Info: 'Electrical & Computer Engineering Department'
  7:
    Bounds: x1=130, y1=95, x2=250, y2=110
    Type: -120
    Info: 'Drexel University'
  8:
    Bounds: x1=110, y1=110, x2=270, y2=125
    Type: -120
    Info: 'Philadelphia, PA, 19104'
  9:
    Bounds: x1=75, y1=125, x2=315, y2=140
    Type: -120
    Info: 'Copyright ©1985 Drexel University'
  10:
    Bounds: x1=125, y1=140, x2=260, y2=155
    Type: -120
    Info: 'All Rights Reserved.'
  11:
    Bounds: x1=40, y1=155, x2=350, y2=170
    Type: -120
    Info: 'To the user: Please direct all correspondence'
  12:
    Bounds: x1=65, y1=170, x2=320, y2=185
    Type: -120
    Info: 'to Dr. B. Onaral at the above address.'
  13:
    Bounds: x1=115, y1=185, x2=400, y2=200
    Type: -120
    Info: 'Version: 1.01 - Oct 1987 - 512k'

DITL_97.txt
Items: (6 entries)
  0:
    Bounds: x1=100, y1=135, x2=180, y2=160
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=255, y2=35
    Type: -120
    Info: '   Non-Integer Exponent'
  2:
    Bounds: x1=25, y1=50, x2=275, y2=65
    Type: -120
    Info: 'The absolute value of the base'
  3:
    Bounds: x1=25, y1=70, x2=255, y2=85
    Type: -120
    Info: 'will be used to avoid generating'
  4:
    Bounds: x1=25, y1=90, x2=255, y2=105
    Type: -120
    Info: 'complex numbers.'
  5:
    Bounds: x1=25, y1=110, x2=255, y2=125
    Type: -120
    Info: ''

DITL_96.txt
Items: (6 entries)
  0:
    Bounds: x1=100, y1=135, x2=180, y2=160
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=255, y2=35
    Type: -120
    Info: '         Mixed Mode'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'The signals in this operation are'
  3:
    Bounds: x1=25, y1=70, x2=255, y2=85
    Type: -120
    Info: 'in different domains.  The result'
  4:
    Bounds: x1=25, y1=90, x2=255, y2=105
    Type: -120
    Info: 'of this operation will be placed'
  5:
    Bounds: x1=25, y1=110, x2=255, y2=125
    Type: -120
    Info: 'in the current domain.'

DITL_95.txt
Items: (6 entries)
  0:
    Bounds: x1=100, y1=135, x2=180, y2=160
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=255, y2=35
    Type: -120
    Info: '         DIVISION BY ZERO !'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'At least one zero has been'
  3:
    Bounds: x1=25, y1=70, x2=255, y2=85
    Type: -120
    Info: 'detected in the divisor.  The'
  4:
    Bounds: x1=25, y1=90, x2=255, y2=105
    Type: -120
    Info: 'result of division at these'
  5:
    Bounds: x1=25, y1=110, x2=255, y2=125
    Type: -120
    Info: 'points will be zero.'

DITL_92.txt
Items: (6 entries)
  0:
    Bounds: x1=100, y1=135, x2=180, y2=160
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=255, y2=35
    Type: -120
    Info: '        T A K E  H E E D  !'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'There now remains 7K or less of'
  3:
    Bounds: x1=25, y1=70, x2=255, y2=85
    Type: -120
    Info: 'free disk space.  There is no'
  4:
    Bounds: x1=25, y1=90, x2=255, y2=105
    Type: -120
    Info: 'longer sufficient space to use'
  5:
    Bounds: x1=25, y1=110, x2=255, y2=125
    Type: -120
    Info: 'storage bins.  Quit and clean up.'

DITL_91.txt
Items: (6 entries)
  0:
    Bounds: x1=100, y1=135, x2=180, y2=160
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=255, y2=35
    Type: -120
    Info: '             W A R N I N G  !'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'Presently there remains less than'
  3:
    Bounds: x1=25, y1=70, x2=255, y2=85
    Type: -120
    Info: '50K of free space on the disk.'
  4:
    Bounds: x1=25, y1=90, x2=255, y2=105
    Type: -120
    Info: 'Program speed and performance'
  5:
    Bounds: x1=25, y1=110, x2=255, y2=125
    Type: -120
    Info: 'may suffer.'

DITL_90.txt
Items: (3 entries)
  0:
    Bounds: x1=100, y1=70, x2=180, y2=90
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=239, y2=33
    Type: -120
    Info: '          F I L E  E R R O R'
  2:
    Bounds: x1=70, y1=40, x2=239, y2=58
    Type: -120
    Info: '            (Empty Bin?)'

DITL_89.txt
Items: (4 entries)
  0:
    Bounds: x1=100, y1=100, x2=180, y2=120
    Type: 4
    Info: 'CONTINUE'
  1:
    Bounds: x1=70, y1=18, x2=239, y2=33
    Type: -120
    Info: '          F I L E  E R R O R'
  2:
    Bounds: x1=25, y1=50, x2=255, y2=65
    Type: -120
    Info: 'Check disk space and see that the'
  3:
    Bounds: x1=25, y1=70, x2=300, y2=85
    Type: -120
    Info: 'TWM disk and its files are unlocked.'

DITL_69.txt
Items: (4 entries)
  0:
    Bounds: x1=1, y1=3, x2=20, y2=17
    Type: -120
    Info: 'n='
  1:
    Bounds: x1=23, y1=3, x2=55, y2=17
    Type: 16
    Info: ''
  2:
    Bounds: x1=58, y1=3, x2=77, y2=17
    Type: -120
    Info: 'Y='
  3:
    Bounds: x1=80, y1=3, x2=152, y2=17
    Type: 16
    Info: ''

DITL_40.txt
Items: (26 entries)
  0:
    Bounds: x1=326, y1=206, x2=406, y2=231
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=87, y1=206, x2=167, y2=231
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=55, y1=95, x2=195, y2=117
    Type: 6
    Info: 'Phase Modulation'
  3:
    Bounds: x1=305, y1=94, x2=434, y2=116
    Type: 6
    Info: 'Freq. Modulation'
  4:
    Bounds: x1=105, y1=125, x2=402, y2=140
    Type: -120
    Info: 'Carrier:    Sine É  A(Sin[K2¹n/N + ¯[n] + ¯o])'
  5:
    Bounds: x1=16, y1=148, x2=89, y2=165
    Type: -120
    Info: 'Ampl., (A) :'
  6:
    Bounds: x1=97, y1=149, x2=157, y2=164
    Type: -112
    Info: ''
  7:
    Bounds: x1=169, y1=148, x2=278, y2=165
    Type: -120
    Info: 'Harmonic #, (K):'
  8:
    Bounds: x1=289, y1=149, x2=333, y2=164
    Type: -112
    Info: ''
  9:
    Bounds: x1=346, y1=149, x2=426, y2=165
    Type: -120
    Info: 'Period, (N) :'
  10:
    Bounds: x1=433, y1=149, x2=480, y2=164
    Type: -112
    Info: ''
  11:
    Bounds: x1=28, y1=177, x2=118, y2=194
    Type: -120
    Info: 'Phase, (¯o) :'
  12:
    Bounds: x1=135, y1=178, x2=182, y2=193
    Type: 16
    Info: ''
  13:
    Bounds: x1=195, y1=178, x2=294, y2=193
    Type: 16
    Info: ''
  14:
    Bounds: x1=311, y1=179, x2=371, y2=196
    Type: -120
    Info: 'Dp or Df:'
  15:
    Bounds: x1=384, y1=179, x2=457, y2=194
    Type: 16
    Info: ''
  16:
    Bounds: x1=347, y1=78, x2=391, y2=92
    Type: -120
    Info: 'k=-64'
  17:
    Bounds: x1=346, y1=52, x2=362, y2=65
    Type: -120
    Info: 'n'
  18:
    Bounds: x1=95, y1=65, x2=405, y2=80
    Type: -120
    Info: 'PM: ¯[n] = Dp * m[n] ... FM: ¯[n] = Df * ·  (m[k])'
  19:
    Bounds: x1=148, y1=28, x2=194, y2=47
    Type: 6
    Info: 'real'
  20:
    Bounds: x1=204, y1=28, x2=290, y2=47
    Type: 6
    Info: 'imaginary'
  21:
    Bounds: x1=305, y1=28, x2=394, y2=47
    Type: 6
    Info: 'magnitude'
  22:
    Bounds: x1=409, y1=27, x2=467, y2=47
    Type: 6
    Info: 'phase'
  23:
    Bounds: x1=467, y1=11, x2=470, y2=27
    Type: 6
    Info: 'power'
  24:
    Bounds: x1=25, y1=30, x2=136, y2=46
    Type: -120
    Info: 'Baseband m(n) :'
  25:
    Bounds: x1=172, y1=1, x2=304, y2=18
    Type: -120
    Info: 'Angle Modulation...'

DITL_39.txt
Items: (4 entries)
  0:
    Bounds: x1=151, y1=46, x2=211, y2=66
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=25, y1=46, x2=85, y2=66
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=15, y1=16, x2=143, y2=33
    Type: -120
    Info: 'System zero :  1e'
  3:
    Bounds: x1=149, y1=16, x2=214, y2=33
    Type: -112
    Info: ''

DITL_31.txt
Items: (9 entries)
  0:
    Bounds: x1=146, y1=85, x2=211, y2=105
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=30, y1=85, x2=110, y2=105
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=30, y1=6, x2=150, y2=24
    Type: -120
    Info: 'Exponential É B'
  3:
    Bounds: x1=150, y1=1, x2=179, y2=17
    Type: -120
    Info: 'Y[n]'
  4:
    Bounds: x1=15, y1=30, x2=112, y2=49
    Type: -120
    Info: '     Base (B)    :'
  5:
    Bounds: x1=128, y1=30, x2=208, y2=46
    Type: -112
    Info: ''
  6:
    Bounds: x1=127, y1=56, x2=172, y2=76
    Type: 4
    Info: '10'
  7:
    Bounds: x1=180, y1=56, x2=225, y2=76
    Type: 4
    Info: 'e'
  8:
    Bounds: x1=33, y1=56, x2=98, y2=76
    Type: 4
    Info: 'Mode'

DITL_30.txt
Items: (10 entries)
  0:
    Bounds: x1=152, y1=103, x2=232, y2=128
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=27, y1=101, x2=107, y2=126
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=38, y1=5, x2=205, y2=22
    Type: -120
    Info: 'Logarithm ... LOG   |Y[n]|'
  3:
    Bounds: x1=152, y1=10, x2=162, y2=28
    Type: -120
    Info: 'B'
  4:
    Bounds: x1=53, y1=32, x2=130, y2=47
    Type: -120
    Info: 'Base  (B)  :'
  5:
    Bounds: x1=144, y1=31, x2=220, y2=47
    Type: -112
    Info: ''
  6:
    Bounds: x1=37, y1=53, x2=118, y2=75
    Type: 4
    Info: 'log |Y[n]|'
  7:
    Bounds: x1=139, y1=52, x2=211, y2=74
    Type: 4
    Info: 'ln |Y[n]|'
  8:
    Bounds: x1=28, y1=79, x2=169, y2=96
    Type: -120
    Info: 'Display zero -->  1e'
  9:
    Bounds: x1=170, y1=79, x2=220, y2=96
    Type: -120
    Info: ''

DITL_29.txt
Items: (11 entries)
  0:
    Bounds: x1=265, y1=126, x2=340, y2=146
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=72, y1=126, x2=147, y2=146
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=34, y1=35, x2=80, y2=53
    Type: 6
    Info: 'real'
  3:
    Bounds: x1=99, y1=35, x2=185, y2=53
    Type: 6
    Info: 'imaginary'
  4:
    Bounds: x1=206, y1=35, x2=295, y2=53
    Type: 6
    Info: 'magnitude'
  5:
    Bounds: x1=316, y1=35, x2=375, y2=53
    Type: 6
    Info: 'phase'
  6:
    Bounds: x1=63, y1=62, x2=124, y2=80
    Type: 6
    Info: 'power'
  7:
    Bounds: x1=138, y1=62, x2=347, y2=80
    Type: 6
    Info: 'Group delay/Inst. frequency'
  8:
    Bounds: x1=103, y1=6, x2=300, y2=22
    Type: -120
    Info: ' Portion of bin to compare ...'
  9:
    Bounds: x1=85, y1=92, x2=236, y2=108
    Type: -120
    Info: 'Signal portion shown :'
  10:
    Bounds: x1=241, y1=93, x2=341, y2=110
    Type: -120
    Info: ''

DITL_28.txt
Items: (11 entries)
  0:
    Bounds: x1=210, y1=90, x2=285, y2=110
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=55, y1=90, x2=130, y2=110
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=22, y1=30, x2=67, y2=48
    Type: 6
    Info: 'real'
  3:
    Bounds: x1=78, y1=30, x2=165, y2=48
    Type: 6
    Info: 'imaginary'
  4:
    Bounds: x1=181, y1=30, x2=270, y2=48
    Type: 6
    Info: 'magnitude'
  5:
    Bounds: x1=279, y1=30, x2=337, y2=48
    Type: 6
    Info: 'phase'
  6:
    Bounds: x1=0, y1=0, x2=0, y2=0
    Type: 6
    Info: 'Not Used'
  7:
    Bounds: x1=0, y1=0, x2=0, y2=0
    Type: 6
    Info: 'Not Used'
  8:
    Bounds: x1=71, y1=6, x2=300, y2=23
    Type: -120
    Info: '   Set destination of signal...'
  9:
    Bounds: x1=71, y1=60, x2=202, y2=78
    Type: -120
    Info: '     Signal shown    :'
  10:
    Bounds: x1=219, y1=59, x2=399, y2=78
    Type: -120
    Info: ''

DITL_27.txt
Items: (15 entries)
  0:
    Bounds: x1=18, y1=30, x2=48, y2=50
    Type: 6
    Info: '4'
  1:
    Bounds: x1=60, y1=30, x2=90, y2=50
    Type: 6
    Info: '8'
  2:
    Bounds: x1=105, y1=30, x2=140, y2=49
    Type: 6
    Info: '16'
  3:
    Bounds: x1=150, y1=30, x2=185, y2=49
    Type: 6
    Info: '32'
  4:
    Bounds: x1=201, y1=30, x2=238, y2=50
    Type: 6
    Info: '64'
  5:
    Bounds: x1=261, y1=30, x2=304, y2=49
    Type: 6
    Info: '128'
  6:
    Bounds: x1=30, y1=90, x2=56, y2=106
    Type: -120
    Info: '   4'
  7:
    Bounds: x1=90, y1=90, x2=116, y2=106
    Type: -120
    Info: '   8'
  8:
    Bounds: x1=147, y1=90, x2=173, y2=106
    Type: -120
    Info: '  16'
  9:
    Bounds: x1=195, y1=90, x2=221, y2=106
    Type: -120
    Info: '  32'
  10:
    Bounds: x1=246, y1=90, x2=272, y2=106
    Type: -120
    Info: '  64'
  11:
    Bounds: x1=114, y1=90, x2=144, y2=106
    Type: -120
    Info: ' 128'
  12:
    Bounds: x1=34, y1=60, x2=109, y2=80
    Type: 4
    Info: 'CANCEL'
  13:
    Bounds: x1=211, y1=60, x2=286, y2=80
    Type: 4
    Info: 'OK'
  14:
    Bounds: x1=30, y1=6, x2=293, y2=20
    Type: -120
    Info: 'Number of points in inverse transform:'

DITL_26.txt
Items: (17 entries)
  0:
    Bounds: x1=253, y1=150, x2=328, y2=170
    Type: 4
    Info: 'SET'
  1:
    Bounds: x1=44, y1=150, x2=119, y2=170
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=52, y1=30, x2=83, y2=50
    Type: 6
    Info: '4'
  3:
    Bounds: x1=92, y1=30, x2=120, y2=50
    Type: 6
    Info: '8'
  4:
    Bounds: x1=128, y1=30, x2=166, y2=50
    Type: 6
    Info: '16'
  5:
    Bounds: x1=174, y1=30, x2=209, y2=50
    Type: 6
    Info: '32'
  6:
    Bounds: x1=218, y1=30, x2=255, y2=50
    Type: 6
    Info: '64'
  7:
    Bounds: x1=264, y1=30, x2=308, y2=50
    Type: 6
    Info: '128'
  8:
    Bounds: x1=50, y1=5, x2=308, y2=20
    Type: -120
    Info: '      Number of points in transform:'
  9:
    Bounds: x1=93, y1=90, x2=208, y2=110
    Type: -120
    Info: 'Record starts at:'
  10:
    Bounds: x1=220, y1=90, x2=250, y2=106
    Type: -112
    Info: ''
  11:
    Bounds: x1=52, y1=124, x2=135, y2=143
    Type: 6
    Info: 'Free zero'
  12:
    Bounds: x1=225, y1=123, x2=316, y2=142
    Type: 6
    Info: 'Fixed Zero'
  13:
    Bounds: x1=1, y1=208, x2=17, y2=217
    Type: -120
    Info: 'Free zero'
  14:
    Bounds: x1=122, y1=206, x2=142, y2=217
    Type: -120
    Info: 'Fixed zero'
  15:
    Bounds: x1=19, y1=204, x2=36, y2=217
    Type: -120
    Info: '_________________________________________________________________________________'
  16:
    Bounds: x1=83, y1=62, x2=271, y2=79
    Type: -120
    Info: 'For forward transform only:'

DITL_25.txt
Items: (18 entries)
  0:
    Bounds: x1=205, y1=150, x2=280, y2=175
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=47, y1=151, x2=122, y2=176
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=16, y1=26, x2=136, y2=46
    Type: 6
    Info: 'Rectangular'
  3:
    Bounds: x1=16, y1=50, x2=180, y2=70
    Type: 6
    Info: 'Bartlett (triangle)'
  4:
    Bounds: x1=16, y1=75, x2=182, y2=93
    Type: 6
    Info: 'Generalized Hamming'
  5:
    Bounds: x1=16, y1=99, x2=136, y2=119
    Type: 6
    Info: 'Blackman'
  6:
    Bounds: x1=17, y1=124, x2=137, y2=144
    Type: 6
    Info: 'Gaussian'
  7:
    Bounds: x1=190, y1=30, x2=270, y2=50
    Type: -120
    Info: 'Starting'
  8:
    Bounds: x1=190, y1=50, x2=250, y2=70
    Type: -120
    Info: 'point:'
  9:
    Bounds: x1=260, y1=50, x2=310, y2=65
    Type: -112
    Info: ''
  10:
    Bounds: x1=190, y1=80, x2=270, y2=100
    Type: -120
    Info: 'Ending'
  11:
    Bounds: x1=190, y1=100, x2=250, y2=120
    Type: -120
    Info: 'point:'
  12:
    Bounds: x1=260, y1=100, x2=310, y2=115
    Type: -112
    Info: ''
  13:
    Bounds: x1=83, y1=210, x2=208, y2=230
    Type: -120
    Info: 'Rectangular'
  14:
    Bounds: x1=37, y1=210, x2=162, y2=230
    Type: -120
    Info: 'Bartlett (triangle)'
  15:
    Bounds: x1=159, y1=210, x2=284, y2=230
    Type: -120
    Info: 'Von Hann'
  16:
    Bounds: x1=194, y1=210, x2=319, y2=230
    Type: -120
    Info: 'Blackman'
  17:
    Bounds: x1=1, y1=210, x2=126, y2=230
    Type: -120
    Info: 'Gaussian'

DITL_24.txt
Items: (12 entries)
  0:
    Bounds: x1=205, y1=147, x2=280, y2=172
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=58, y1=147, x2=133, y2=172
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=185, y1=5, x2=263, y2=20
    Type: -120
    Info: 'Period    :'
  3:
    Bounds: x1=270, y1=5, x2=355, y2=20
    Type: -112
    Info: ''
  4:
    Bounds: x1=185, y1=30, x2=263, y2=45
    Type: -120
    Info: 'Width     :'
  5:
    Bounds: x1=270, y1=30, x2=355, y2=45
    Type: -112
    Info: ''
  6:
    Bounds: x1=185, y1=55, x2=263, y2=70
    Type: -120
    Info: 'Amplitude:'
  7:
    Bounds: x1=270, y1=55, x2=355, y2=70
    Type: -112
    Info: ''
  8:
    Bounds: x1=185, y1=80, x2=263, y2=95
    Type: -120
    Info: 'Delay     :'
  9:
    Bounds: x1=270, y1=80, x2=355, y2=95
    Type: -112
    Info: ''
  10:
    Bounds: x1=185, y1=105, x2=263, y2=120
    Type: -120
    Info: 'DC Offset:'
  11:
    Bounds: x1=270, y1=105, x2=355, y2=120
    Type: -112
    Info: ''

DITL_23.txt
Items: (13 entries)
  0:
    Bounds: x1=156, y1=115, x2=236, y2=140
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=115, x2=95, y2=140
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=57, y1=6, x2=198, y2=22
    Type: -120
    Info: 'Exponential É B'
  3:
    Bounds: x1=166, y1=1, x2=187, y2=18
    Type: -120
    Info: 'An'
  4:
    Bounds: x1=15, y1=30, x2=144, y2=49
    Type: -120
    Info: 'Base, (B)              :'
  5:
    Bounds: x1=153, y1=31, x2=233, y2=46
    Type: -112
    Info: ''
  6:
    Bounds: x1=153, y1=55, x2=192, y2=72
    Type: 4
    Info: ' 10'
  7:
    Bounds: x1=199, y1=55, x2=232, y2=72
    Type: 4
    Info: 'e'
  8:
    Bounds: x1=15, y1=55, x2=144, y2=75
    Type: -120
    Info: 'Common bases    :'
  9:
    Bounds: x1=121, y1=175, x2=151, y2=195
    Type: -120
    Info: ' 10'
  10:
    Bounds: x1=48, y1=175, x2=73, y2=195
    Type: -120
    Info: ' e'
  11:
    Bounds: x1=15, y1=80, x2=144, y2=99
    Type: -120
    Info: 'Exponent, (A)       :'
  12:
    Bounds: x1=154, y1=80, x2=234, y2=95
    Type: -112
    Info: ''

DITL_22.txt
Items: (7 entries)
  0:
    Bounds: x1=109, y1=4, x2=160, y2=22
    Type: -120
    Info: 'adjust'
  1:
    Bounds: x1=15, y1=30, x2=145, y2=47
    Type: -120
    Info: 'Lower bound, (A)  :'
  2:
    Bounds: x1=158, y1=31, x2=238, y2=46
    Type: -112
    Info: ''
  3:
    Bounds: x1=15, y1=55, x2=144, y2=73
    Type: -120
    Info: 'Upper bound, (n)  :'
  4:
    Bounds: x1=158, y1=56, x2=238, y2=71
    Type: -112
    Info: ''
  5:
    Bounds: x1=161, y1=90, x2=241, y2=115
    Type: 4
    Info: 'OK'
  6:
    Bounds: x1=15, y1=90, x2=95, y2=115
    Type: 4
    Info: 'CANCEL'

DITL_21.txt
Items: (7 entries)
  0:
    Bounds: x1=193, y1=90, x2=273, y2=115
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=90, x2=95, y2=115
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=15, y1=7, x2=269, y2=26
    Type: -120
    Info: 'Y[n]=·Ä(k), where k goes from i --> j'
  3:
    Bounds: x1=38, y1=34, x2=154, y2=52
    Type: -120
    Info: 'Lower limit, (i)  :'
  4:
    Bounds: x1=175, y1=35, x2=235, y2=50
    Type: -112
    Info: ''
  5:
    Bounds: x1=37, y1=61, x2=153, y2=80
    Type: -120
    Info: 'Upper limit, (j)  :'
  6:
    Bounds: x1=175, y1=63, x2=235, y2=78
    Type: -112
    Info: ''

DITL_20.txt
Items: (8 entries)
  0:
    Bounds: x1=170, y1=120, x2=250, y2=145
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=120, x2=95, y2=145
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=25, y1=7, x2=241, y2=42
    Type: -120
    Info: 'Generalized Hamming windows:
w[n] = A - B(Cos(2¹n/N-1))'
  3:
    Bounds: x1=142, y1=51, x2=160, y2=69
    Type: -120
    Info: 'A :'
  4:
    Bounds: x1=171, y1=50, x2=251, y2=65
    Type: -112
    Info: ''
  5:
    Bounds: x1=143, y1=75, x2=161, y2=91
    Type: -120
    Info: 'B :'
  6:
    Bounds: x1=170, y1=74, x2=250, y2=89
    Type: -112
    Info: ''
  7:
    Bounds: x1=8, y1=52, x2=126, y2=115
    Type: -120
    Info: 'von Hann: A=0.5, B=0.5
Hamming: A=0.54, B=0.46'

DITL_19.txt
Items: (5 entries)
  0:
    Bounds: x1=76, y1=5, x2=114, y2=22
    Type: -120
    Info: 'DC ...'
  1:
    Bounds: x1=20, y1=30, x2=110, y2=50
    Type: -120
    Info: 'Amplitude :'
  2:
    Bounds: x1=115, y1=30, x2=153, y2=45
    Type: -112
    Info: ''
  3:
    Bounds: x1=110, y1=60, x2=170, y2=80
    Type: 4
    Info: 'OK'
  4:
    Bounds: x1=12, y1=60, x2=72, y2=80
    Type: 4
    Info: 'CANCEL'

DITL_18.txt
Items: (12 entries)
  0:
    Bounds: x1=170, y1=140, x2=250, y2=165
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=140, x2=95, y2=165
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=39, y1=3, x2=223, y2=19
    Type: -120
    Info: 'SINE É  A(Sin[K2¹n/N + ¯])'
  3:
    Bounds: x1=15, y1=28, x2=164, y2=46
    Type: -120
    Info: 'Amplitude, (A)            :'
  4:
    Bounds: x1=170, y1=28, x2=250, y2=43
    Type: -112
    Info: ''
  5:
    Bounds: x1=15, y1=50, x2=165, y2=66
    Type: -120
    Info: 'Harmonic number, (K):'
  6:
    Bounds: x1=170, y1=50, x2=250, y2=65
    Type: -112
    Info: ''
  7:
    Bounds: x1=15, y1=71, x2=162, y2=89
    Type: -120
    Info: 'Period, (N)                  :'
  8:
    Bounds: x1=170, y1=72, x2=250, y2=87
    Type: -112
    Info: ''
  9:
    Bounds: x1=15, y1=93, x2=138, y2=108
    Type: -120
    Info: 'Phase shift, (¯)  :'
  10:
    Bounds: x1=40, y1=115, x2=87, y2=130
    Type: 16
    Info: ''
  11:
    Bounds: x1=140, y1=115, x2=237, y2=130
    Type: 16
    Info: ''

DITL_17.txt
Items: (7 entries)
  0:
    Bounds: x1=40, y1=5, x2=195, y2=21
    Type: -120
    Info: 'Rectangular Pulse É'
  1:
    Bounds: x1=15, y1=30, x2=121, y2=46
    Type: -120
    Info: 'Starting point:'
  2:
    Bounds: x1=139, y1=30, x2=199, y2=45
    Type: -112
    Info: ''
  3:
    Bounds: x1=15, y1=55, x2=120, y2=73
    Type: -120
    Info: 'Ending point  :'
  4:
    Bounds: x1=139, y1=55, x2=199, y2=70
    Type: -112
    Info: ''
  5:
    Bounds: x1=126, y1=90, x2=206, y2=115
    Type: 4
    Info: 'OK'
  6:
    Bounds: x1=15, y1=90, x2=95, y2=115
    Type: 4
    Info: 'CANCEL'

DITL_16.txt
Items: (8 entries)
  0:
    Bounds: x1=160, y1=103, x2=220, y2=123
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=104, x2=80, y2=123
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=20, y1=5, x2=161, y2=23
    Type: -120
    Info: 'Enter upper vertical'
  3:
    Bounds: x1=20, y1=28, x2=129, y2=43
    Type: -120
    Info: 'bound of data :'
  4:
    Bounds: x1=150, y1=30, x2=195, y2=45
    Type: -112
    Info: ''
  5:
    Bounds: x1=20, y1=55, x2=157, y2=72
    Type: -120
    Info: 'Enter lower vertical'
  6:
    Bounds: x1=20, y1=80, x2=132, y2=96
    Type: -120
    Info: 'bound of data :'
  7:
    Bounds: x1=150, y1=80, x2=195, y2=95
    Type: -112
    Info: ''

DITL_15.txt
Items: (5 entries)
  0:
    Bounds: x1=150, y1=66, x2=210, y2=86
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=24, y1=66, x2=84, y2=86
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=34, y1=16, x2=137, y2=34
    Type: -120
    Info: 'Display width :'
  3:
    Bounds: x1=154, y1=17, x2=184, y2=32
    Type: -112
    Info: ''
  4:
    Bounds: x1=40, y1=42, x2=176, y2=59
    Type: -120
    Info: 'Limits:  10 ---> 129'

DITL_14.txt
Items: (6 entries)
  0:
    Bounds: x1=110, y1=60, x2=150, y2=80
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=28, y1=60, x2=85, y2=80
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=25, y1=30, x2=72, y2=50
    Type: 6
    Info: '1'
  3:
    Bounds: x1=75, y1=30, x2=122, y2=50
    Type: 6
    Info: '2'
  4:
    Bounds: x1=125, y1=30, x2=159, y2=49
    Type: 6
    Info: '3'
  5:
    Bounds: x1=20, y1=5, x2=150, y2=24
    Type: -120
    Info: '       Set pen size'

DITL_13.txt
Items: (7 entries)
  0:
    Bounds: x1=170, y1=84, x2=250, y2=104
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=84, x2=95, y2=104
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=50, y1=7, x2=250, y2=24
    Type: -120
    Info: 'f(n) --> (A/B)f(n) ...'
  3:
    Bounds: x1=15, y1=30, x2=163, y2=49
    Type: -120
    Info: 'Numerator, (A)          :'
  4:
    Bounds: x1=180, y1=30, x2=235, y2=45
    Type: -112
    Info: ''
  5:
    Bounds: x1=15, y1=55, x2=162, y2=72
    Type: -120
    Info: 'Denominator, (B)       :'
  6:
    Bounds: x1=180, y1=55, x2=235, y2=70
    Type: -112
    Info: ''

DITL_12.txt
Items: (9 entries)
  0:
    Bounds: x1=170, y1=124, x2=250, y2=144
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=15, y1=124, x2=95, y2=144
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=76, y1=7, x2=200, y2=23
    Type: -120
    Info: 'f(n) --> f(An/B) É'
  3:
    Bounds: x1=15, y1=30, x2=163, y2=49
    Type: -120
    Info: 'Numerator, (A)          :'
  4:
    Bounds: x1=180, y1=30, x2=235, y2=45
    Type: -112
    Info: ''
  5:
    Bounds: x1=15, y1=55, x2=162, y2=72
    Type: -120
    Info: 'Denominator, (B)       :'
  6:
    Bounds: x1=180, y1=55, x2=235, y2=70
    Type: -112
    Info: ''
  7:
    Bounds: x1=24, y1=80, x2=255, y2=98
    Type: -120
    Info: 'Warning: Expanding the horizontal'
  8:
    Bounds: x1=10, y1=99, x2=277, y2=114
    Type: -120
    Info: 'scale will create zeros between points.'

DITL_11.txt
Items: (7 entries)
  0:
    Bounds: x1=122, y1=90, x2=170, y2=110
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=21, y1=90, x2=81, y2=110
    Type: 4
    Info: 'CANCEL'
  2:
    Bounds: x1=113, y1=60, x2=173, y2=80
    Type: 6
    Info: 'Cyclic'
  3:
    Bounds: x1=12, y1=60, x2=101, y2=80
    Type: 6
    Info: 'Linear'
  4:
    Bounds: x1=33, y1=5, x2=146, y2=23
    Type: -120
    Info: 'f(n) --> f(n-K) ...'
  5:
    Bounds: x1=33, y1=29, x2=90, y2=48
    Type: -120
    Info: '    K   ='
  6:
    Bounds: x1=105, y1=30, x2=143, y2=45
    Type: -112
    Info: ''